(1) into the water: water tank into the water tank general access from the side of the brand, but also can be accessed from the bottom or the top. When the tank pressure water pipe network use tanks much money, it should be located at the outlet of the inlet pipe network or hydraulic valve float. Float valve is generally less than two. Float same network diameter inlet pipe diameter, before each floating ball valves should be fitted overhaul. (2) outlet: the tank outlet pipe which can be accessed from the side or bottom. Pick out from the side wall of the outlet pipe from the outlet opening in the bottom or the top surface of the bottom of the pick-out time, should be above the tank bottom 50 mm. Yan brake outlet port should be set. Specifications and performance; SMC molded veneer Specifications (For other specifications can be negotiated): 1000x1500mm, 1000 × 1000mm, 1000 × 500mm, 500 × 500mm. Thickness 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm; veneer which 5mm thickness exclusively for the tank cover. SMC molded tank implementation of national building materials industry standard: (JC658.1-1997) SMC water tank | Hongqiao District water tank | Chen Yu-conditioned factory outlets provided by Wu Cheng Chen-yu air-conditioning Limited. Wu Cheng Chen Yu Air Conditioning Equipment Co., Ltd. (www.wccykt.com) strong, credible, in Dezhou fan, ventilation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Chenyu air conditioning and you hand into the brilliant, for a better future!